Saved

Sell

Search

Flatbed Body Only Truck Bodys For Sale

Looking to buy a flatbed body only? Browse our extensive inventory of new and used flatbed body only from local dealers and private sellers. Compare prices, models, trims, options and specifications between different flatbed body onlies on Commercial Truck Trader.
close
38

Suggested Listings

2024 SWITCH-N-GO FLATBEDS BODY in Winder, GA
$5,670

New 2024 SWITCH-N-GO Roll Off Body Only

FLATBEDS BODY
Stock # FLATBEDS
<p><strong>IN STOCK,</strong> 11FT SWITCH-N-GO DIAMOND-PLATED FLATBED, STAKE POCKETS, RUB RAIL AOUND ENTIRE BODY, (4) TIE DOWN HOOKS, OVER 100+ BODIES <strong>IN</strong> <strong>STOCK AT ALL TIMES</strong>, WINDER, GA…</p><p>11FT - 5,670.00 - <strong>IN STOCK</strong></p><p>14FT - 6,494.00 -<strong> IN STOCK</strong></p><p>15FT - 7,202.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with zinc prime & powder coated finish — Body widths are 90" for the deck and 94.5" outside — Inside bulkhead heights are high visibility in 39" or 51" — Body lengths include 1' beavertail, bodies without beavertail will receive stake pockets on rear — Floors on 9' to 12' are constructed with 1/8" steel diamond plate — Floors on 13' to 15' are constructed with 3/16" steel diamond plate — Crossmembers are constructed with 3" structural channel on 16" centers — External stake pockets are constructed on 24" centers with 3/8" x 2" flat bar rub rail — Chain tie-down key holes in floor at the four corners — Beavertail bodies receive integrated steel 4" steel ground rollers or no beavertail bodies receive standard 6" steel ground rollers</p><p> </p>
Hackett Sales,Inc.
Winder, GA
2024 CM SK in Sycamore, IL
$7,210

New 2024 CM Flatbed Body Only

SK
Stock # 411340
New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 CM ALSK in Sycamore, IL
$9,168

New 2024 CM Flatbed Body Only

ALSK
Stock # 411344
New CM ALSK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02975642. Weighs approx 741 lbs. Serial # MV00411344. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: Bed will be wider than needed but will work. Meaure to compare. **When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Note for skirted beds: This bed could also possibly work for other trucks with some adaptation but keep in mind if the CA don&apos;t match, then the bed may be touching the truck cab or will have a bigger than normal gap; and the rear wheel won&apos;t be centered in the bed&apos;s wheel well.A 57 inch CA bed is ideal for the 2020 & newer Fords.  CAUTION! If you have a Ford that is 2023 & newer model year and is a bed delete, then please make sure you read the service bulletin from Ford in the pictures! (or give us a call and we can explain it to you).Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard i
Rondo Enterprises
Sycamore, IL
2024 Norstar SR 84" x 84" in Bolton, CT
$4,399

New 2024 Norstar Flatbed Body Only

SR 84" x 84"
Stock # T15115
2024 Norstar, SR 84" x 84" Truck, Truck Bed, 2024 Norstar SR 84" x 84" <strong>Norstar Diamond Plate Flat Bed</strong><p>One of our best sellers - and for good reason. The Norstar SR model offers everything you need in a flatbed configuration. If you want a little more from this basic configuration, look over our options list. We have underbody locking tool boxes for additional storage and gooseneck troughs for a towing upgrade, spare tire mounts for the unexpected and a list of other options to personalize your bed for your home or business needs.</p><p>The standard 2.5" receiver allows you to add a hitch for bumper pull cargo and a 2 5/16" gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Durable diamond plate construction and powder coat will make this bed your most faithful assistant for years to come. Tapered corners, 7 way plug with 4 way adapter and recessed 2 5/16" ball and receiver hitch give you a towing package standard. Exposed stake pockets and rub rail ensure you have tie down points for any load, plus the LED lights are standard on all SRs. Full 11 gauge skirted rear bumpers finish off every model as an additional standard feature.</p><strong>Features may include:</strong><ul><li>Structural Steel Frame</li></ul><ul><li>2.5" 18.5k Rated Bumper Receiver</li></ul><ul><li>30k Rated 2 5/16" Gooseneck Ball</li></ul><ul><li>4" Runner Channels</li></ul><ul><li>Formed 3 x 3/16" Channel Cross Members</li></ul><ul><li>Steel Tube Head Rack with Cross Bars, Tail and Reverse Lights</li></ul><ul><li>Steel 1/8" Diamond Plate Floor</li></ul><ul><li>Built-In Gooseneck Well w/ Ball Mounted and Diamond Plate Lid</li></ul><ul><li>Angled Fuel Filler Neck and DEF Ready</li></ul><ul><li>1/8" Diamond Plate Construction</li></ul><ul><li>Receiver Hitch Ready</li></ul><ul><li>7 Way Plug in Gooseneck Box</li></ul><ul><li>Powder Coated Black</li></ul><ul><li>2.5" LED Reflective Marker Lights</li></ul><ul><li>4 Clear 6" Oval LED Reverse Lights</li></ul><ul><li>6 Red 6" Oval LED ST/TL/TN Lights</li></ul><ul><li>Single LED License Plate Light</li></ul><ul><li>All Lighting DOT Approved</li></ul><ul><li>Molded Sealed Harness with Resistors</li></ul><ul><li>7 Way Receiver Female Plug with ADAPTER</li></ul><ul><li>11 Ga Skirted Rear Bumper</li></ul><ul><li>Adjustable Mud Flap Brackets</li></ul>, Connecticut Trailers features the following options for this Norstar Truck Bed: Adj. Runners 4"x38"-42" 24" OC Diamond Plate w/2.5" Reciever Side Pockets and Rub Rails 3.5" Tube x 37.75" Head Rack 2-5/16" 30K Ball 4/5/7 Way Plug + 7 Way in GN Well LED Lights
Connecticut Trailers Inc.
Bolton, CT
2024 Norstar SR 84" x 84" in Bolton, CT
$4,499

New 2024 Norstar Flatbed Body Only

SR 84" x 84"
Stock # T15117
2024 Norstar, SR 84" x 84" Truck, Truck Bed, 2024 Norstar SR 84" x 84" <strong>Norstar Diamond Plate Flat Bed</strong><p>One of our best sellers - and for good reason. The Norstar SR model offers everything you need in a flatbed configuration. If you want a little more from this basic configuration, look over our options list. We have underbody locking tool boxes for additional storage and gooseneck troughs for a towing upgrade, spare tire mounts for the unexpected and a list of other options to personalize your bed for your home or business needs.</p><p>The standard 2.5" receiver allows you to add a hitch for bumper pull cargo and a 2 5/16" gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Durable diamond plate construction and powder coat will make this bed your most faithful assistant for years to come. Tapered corners, 7 way plug with 4 way adapter and recessed 2 5/16" ball and receiver hitch give you a towing package standard. Exposed stake pockets and rub rail ensure you have tie down points for any load, plus the LED lights are standard on all SRs. Full 11 gauge skirted rear bumpers finish off every model as an additional standard feature.</p><strong>Features may include:</strong><ul><li>Structural Steel Frame</li></ul><ul><li>2.5" 18.5k Rated Bumper Receiver</li></ul><ul><li>30k Rated 2 5/16" Gooseneck Ball</li></ul><ul><li>4" Runner Channels</li></ul><ul><li>Formed 3 x 3/16" Channel Cross Members</li></ul><ul><li>Steel Tube Head Rack with Cross Bars, Tail and Reverse Lights</li></ul><ul><li>Steel 1/8" Diamond Plate Floor</li></ul><ul><li>Built-In Gooseneck Well w/ Ball Mounted and Diamond Plate Lid</li></ul><ul><li>Angled Fuel Filler Neck and DEF Ready</li></ul><ul><li>1/8" Diamond Plate Construction</li></ul><ul><li>Receiver Hitch Ready</li></ul><ul><li>7 Way Plug in Gooseneck Box</li></ul><ul><li>Powder Coated Black</li></ul><ul><li>2.5" LED Reflective Marker Lights</li></ul><ul><li>4 Clear 6" Oval LED Reverse Lights</li></ul><ul><li>6 Red 6" Oval LED ST/TL/TN Lights</li></ul><ul><li>Single LED License Plate Light</li></ul><ul><li>All Lighting DOT Approved</li></ul><ul><li>Molded Sealed Harness with Resistors</li></ul><ul><li>7 Way Receiver Female Plug with ADAPTER</li></ul><ul><li>11 Ga Skirted Rear Bumper</li></ul><ul><li>Adjustable Mud Flap Brackets</li></ul>, Connecticut Trailers features the following options for this Norstar Truck Bed: Adj. Runners 4"x38"-42" 24" OC Diamond Plate w/2.5" Reciever Side Pockets and Rub Rails 3.5" Tube x 37.75" Head Rack 2-5/16" 30K Ball 4/5/7 Way Plug + 7 Way in GN Well LED Lights
Connecticut Trailers Inc.
Bolton, CT
2024 CM Trailers TM-102/97/58/42 8.6 DUAL WHEEL LONGBED DODGE/FORD in Mount Vernon, IL
$12,995

New 2024 CM Trailers Flatbed Body Only

TM-102/97/58/42 8.6 DUAL WHEEL LONGBED DODGE/FORD
Stock # CM97263
2024 CM Trailers TM-102/97/58/42 8.6 DUAL WHEEL LONGBED DODGE/FORD, Flat Bed Body Trailer, , CM TM MODEL CONTRACTOR BED, 102" X 97", 58" CAB TO AXLE (DODGE/FORD TRUCK), 42 INCH FRAME WIDTH, LED FLUSH MOUNTED TAIL, BRAKE, AND BACK UP LIGHTS, 2 REAR WORK LIGHTS, MODULAR SEALED WIRING HARNESS, 1/8 INCH STEEL TREADPLATE FLOOR, 4 SLIDING FLOOR MOUNT TIE DOWNS, TAPERED REAR CORNERS, DROP DOWN REAR TAILGATE WITH CENTER HANDLE, 18,500 LB RATED B&W BUMPER PULL HITCH, 30,000 LB RATED B&W GOOSENECK HITCH WITH 7-WAY ELECTRICAL PLUG, 2 FRONT LARGE TOOLBOXES (ONE ON EACH SIDE), 2 REAR TOOLBOXES (ONE ON EACH SIDE), ONE LONG UPPER TOOLBOX ON EACH SIDE, BLACK POWDER-COAT FINISH. Please check with us for exact fitment as makes vary slightly., 8 x 8.00 x
Country Blacksmith Trailers - Mount Vernon
Mount Vernon, IL
2024 Zimmerman RMSR-94-114 9.4 DUAL WHL CHASSIS in Mount Vernon, IL
$13,995

New 2024 Zimmerman Flatbed Body Only

RMSR-94-114 9.4 DUAL WHL CHASSIS
Stock # ZM01064
2024 Zimmerman RMSR-94-114 9.4 DUAL WHL CHASSIS, Flat Bed Body Trailer, , New Zimmerman Ranch Master Aluminum Flatbed, 114" long x 94" wide, fits a dually wheel CAB AND CHASSIS (9 FOOT FRAME) Ford, Dodge, or GM pickup! Equipped with a built in 30k rated B&W gooseneck hitch and a 2-1/2 inch rear receiver hitch. This bed has more box space than most beds with a front 36" long x 28" tall x 16" deep chest box built into the bed and a rear box built into the bed behind the wheel well. Lockable toolboxes with greaseable hinges and smooth aluminum doors. One drawer in left front box and one shelf in right front box. LED tail lights with lighted headache rack and clearance lights. Stake pockets and rub rails. Custom top deck toolbox, 72" long x 8" tall x 16" deep, added on each side for extra storage space! 5 INCH DROP IN TAILBOARD. Zimmerman beds are better built than anything you&apos;ve seen yet with 3/16" aluminum construction this bed is ready for some hard work! We can install this bed in about 6 hours and we have a courtesy vehicle for your use while you wait. Give us a call and schedule your appointment now!, 9 x 8.00 x
Country Blacksmith Trailers - Mount Vernon
Mount Vernon, IL
2024 Bradford Built BB-4BOX-96-103-42-56 8.6 DUAL WHEEL LONGBED FORD/G in Mount Vernon, IL
$6,995

New 2024 Bradford Built Flatbed Body Only

BB-4BOX-96-103-42-56 8.6 DUAL WHEEL LONGBED FORD/G
Stock # BB42230
2024 Bradford Built BB-4BOX-96-103-42-56 8.6 DUAL WHEEL LONGBED FORD/G, Flat Bed Body Trailer, , NEW PICKUP FLATBED FOR TRUCK FOR SALE, BRADFORD BUILT 96 INCH X 103 INCH STEEL 4 BOX UTILITY BED, 42 INCH FRAME WIDTH, 55-56 INCH CAB TO AXLE, LIGHTED HEADACHE RACK, LED LIGHTS, GOOSENECK HITCH & REAR 2-1/2" RECEIVER HITCH, TAPERED REAR CORNERS, 1/8" STEEL TREADPLATE FLOOR, 4" DROP DOWN SIDES, ZINC PRIMER AND BLACK POWDERCOAT, SKIRTED BED WITH 4 TOOLBOXES (ONE IN EACH CORNER), THIS BED FITS A DUALLY WHEEL BED TAKE OFF TRUCK (LONG BED FORD/GM). Please check with us for exact fitment as makes vary slightly., 8 x 8.00 x
Country Blacksmith Trailers - Mount Vernon
Mount Vernon, IL
2024 Bradford Built BB-4BOX-96-103-42-56 8.6 DUAL WHEEL LONGBED FORD/G in Mount Vernon, IL
$6,995

New 2024 Bradford Built Flatbed Body Only

BB-4BOX-96-103-42-56 8.6 DUAL WHEEL LONGBED FORD/G
Stock # BB42221
2024 Bradford Built BB-4BOX-96-103-42-56 8.6 DUAL WHEEL LONGBED FORD/G, Flat Bed Body Trailer, , NEW PICKUP FLATBED FOR TRUCK FOR SALE, BRADFORD BUILT 96 INCH X 103 INCH STEEL 4 BOX UTILITY BED, 42 INCH FRAME WIDTH, 55-56 INCH CAB TO AXLE, LIGHTED HEADACHE RACK, LED LIGHTS, GOOSENECK HITCH & REAR 2-1/2" RECEIVER HITCH, TAPERED REAR CORNERS, 1/8" STEEL TREADPLATE FLOOR, 4" DROP DOWN SIDES, ZINC PRIMER AND BLACK POWDERCOAT, SKIRTED BED WITH 4 TOOLBOXES (ONE IN EACH CORNER), THIS BED FITS A DUALLY WHEEL BED TAKE OFF TRUCK (LONG BED FORD/GM). Please check with us for exact fitment as makes vary slightly., 8 x 8.00 x
Country Blacksmith Trailers - Mount Vernon
Mount Vernon, IL
2024 Zimmerman 6000XL-4B-97-136 11.4 DUAL WHEEL CHASSIS in Mount Vernon, IL
$10,546

New 2024 Zimmerman Flatbed Body Only

6000XL-4B-97-136 11.4 DUAL WHEEL CHASSIS
Stock # ZM07675
2024 Zimmerman 6000XL-4B-97-136 11.4 DUAL WHEEL CHASSIS, Flat Bed Body Trailer, , This is a very nice Zimmerman Aluminum 6000XL FLATBED WITH 4 UNDERBODY TOOLBOXES AND SKIRTS for a dual wheel cab and chassis pickup (11&apos; Frame, 84" cab to axle truck). Size is 97" x 136" bed. This bed comes with the rear 2-1/2" receiver hitch and B&W Turnover ball gooseneck hitch. (2) 48" aluminum front toolboxes, (2) 20" rear aluminum toolboxes, 1/8" tread plate toolbox construction, aluminum skirts mounted between the toolboxes. This bed comes standard with heavy wall extruded tube frame, 3/16" aluminum tread deck plate, LED lights, heavy front headache rack (49" TALL), stake pockets with rub rails, toolbox mounting brackets, and mud flap mounting brackets. MUD FLAPS INCLUDED., 11 x 8.50 x
Country Blacksmith Trailers - Mount Vernon
Mount Vernon, IL
2024 CM RD in Sycamore, IL
$4,388

Used 2024 CM Flatbed Body Only

RD
Stock # 414188
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM RD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), AS IS - TC, 2.5" 24k rear hitch, Discounted for minor shipping damage to tailboard skirt (gouges) and rubrail (scratched, bowed in slightly)., color: Black. Mfg part # RD-02975842. Weighs approx 972 lbs. Serial # MB00414188. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8&apos; long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 CM RD in Sycamore, IL
$4,362

Used 2024 CM Flatbed Body Only

RD
Stock # 419999
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), AS IS - SD, TC, 2.5" 24k rear hitch, Discounted for shipping damage to RH corner of tailboard skirt (buckled)., color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00419999. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 CM RD in Sycamore, IL
$4,560

Used 2024 CM Flatbed Body Only

RD
Stock # 419300
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), AS IS - SD, TC, 2.5" 24k rear hitch, Discounted for very minor shipping damage., color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00419300. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
Purchase In Progress
Another customer has started purchasing this motorcycle. By providing your information below, we can let you know if this motorcycle becomes available again.
Please enter a valid first name.
Please enter a valid last name.
Please enter a valid email.
Please enter a valid phone number.
By using this site, you agree to our Terms of Use & our Privacy Policy.

Top Available Cities with Inventory

Disclaimers

Commercial Truck Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. CommercialTruckTrader.com is not responsible for the accuracy of the information. Please refer to the Commercial Truck Trader Terms of Use for further information.