|Class:||CLASS 3 (GVW 10001 - 14000)|
|Cab Type:||STANDARD CAB|
|Max Horse Power:||445|
|Engine Size:||6.6L cc|
|Front Tire Size:||17.0 x 6.5|
|Rear Tire Size:||17.0 x 6.5|
|Fuel Tank Size:||64|
|Interior Color:||Dark Ash|
|Upfit Body Type:||Dump Bodies|
|Upfit Model:||Marauder Drop-Side Dump Body|
2019 CHEVROLET SILVERADO 3500HD, 2019 SILVERADO 3500 2WD, HD, Reg Cab 11'.5" Load Pro Dump ,6.6 liter Duramax Diesel engine, 6 speed Allison auto trans, Air Cond., tilt wheel, cruise control, power locks, trailering mirrors, trailer brake controls, 40/20/40 vinyl front seating, HD Rubber floor covering, 3.73 rear axle, (2) 12 volt pwr outlets, (2) USB ports, AUX port,HD receiver 7 pin plug. LED marker lights, All pricing is AFTER rebates and BEFORE tax, title, and fees.Prices reflect ALL APPLICABLE REBATES FOR QUALIFIED FLEET BUYERS. Members of Trade Associations may qualify for additional incentivesPlease contact Fleet / Commercial Manager Mike Fossett at (770) 351-7232 with pricing questions!Nationwide Delivery Available.ASK FOR FOSSETT
This is a LOAD PRO 11.5 Flatbed Dump body with two way gate and drop sides.
Alarm provides additional safety on the job site.
Dirt Shedding Top Rail
Fully-boxed dirt shedding top rail.
Double-Acting Power Unit
Double-acting (power-up/power-down) 12-Volt electric hydraulic power unit for ease of operation.
Dual Wall Tailgate
Dual-wall tailgate with vertical braces.
Forward Tailgate Release
Features adjustable linkage.
Full-Height Front Radii Corner Post
Provides additional structural strength to the body.
Full-Depth Rear Corner Posts
Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.
Full-Length Cab Shield
40” full cab shield.
Full-Width Rear Apron
Full-width rear apron with double-acting tailgate and quick-release tailgate hardware. Recessed LED tail lights are rubber grommet shock-mounted.
Heavy-Duty Tailgate Hardware
Heavy-duty steel hinges with grease fittings for lubricating.
Subframe-mounted, double-acting electric hydraulic scissor hoist with an 8-13 ton capacity and 50° dumping angle. Hoist assembly includes lubricating grease fittings on hoist and hinge assembly. Features safety body prop, grease zerks for ease of service, an all-weather pump and motor cover and in-cab tethered hand-held control. Black powder coat finish.
Rugged Steel Floor
Two-piece HRA1011 steel floor plate with angled sidewalls to floor to eliminate bridging of material.
Shock-Mounted Rear Lights
Recessed shock-mounted incandescent reverse lights installed in rear apron in addition to license plate bracket and shock-mounted, recessed L.E.D. stop, turn and tail lights and marker lights in rear post.
Single-Lever Drop-Down Tailgate Release
Single lever fast-action drop-down tailgate release.
Tailgate Latch Pins
Heavy-duty latch pins with grease fittings.
Durable Understructure Marauder
Interlaced understructure provides lower body-mounted height. Consists of 7-gauge formed-channel long sills and 3" structural crossmembers.
All pricing is AFTER rebates and BEFORE tax, title, and fees.
Prices reflect ALL APPLICABLE REBATES FOR QUALIFIED FLEET BUYERS.
Members of Trade Associations may qualify for additional incentives
CONTACT FLEET / COMMERCIAL MANAGER MIKE FOSSETT AT (770) 351-7232 WITH ANY PRICING QUESTIONS.
ASK FOR FOSSETT