Upfit with CUSCO Mastervac

Cusco MasterVac 5327, Non-Code - TANK - 3,000 USG, 78" Diameter • 0.3125 SA516-70 Shell & Head Material • Operating Temperature Range -20 to 200 Degrees F • Internal Pressure 15 PSIG, External Pressure 15PSIG (Full Vacuum) • 2" Brass Pressure Relief set at 15PSI • One (1) Anti Surge Baffle Mounted on Reinforced Pads • External Circumferential Reinforcement Rings with Tank Support Feet • 8" Internal Shut Off with 12" SS Float Ball and Cage Assembly with Neoprene Rubber Seat • Liquid Level Gauge, SS Constructed Rotary Float Gauge with 6" Float Ball Assembly Located on Front Drivers Side with Grab Handle and Up Position Tie Back • Full Length Hydraulic Dump Sub-Frame, 20 Ton 3 Stage Single Acting Dump Cylinder, Rear Dump Pivot Assembly & Safety Brace • Hydraulic Full Opening Rear Door Assembly with 6 Heavy-Duty Door Bolts, Neoprene Rubber Rear Door Gasket, Dual Double Acting Side Mounted Hydraulic Cylinder and Safety Brace • Hydraulic Vibrator Mounted Bottom of Tank with Reinforcing Pad, Heavy Duty Mounting Channel and Pressure Relief Valve • VALVES - Isolation Valve: 8” Air Operated Butterfly Valve Between Primary and Cyclone with PTO Interconnect • Suction Valve, 6" Manually Operated Brass Valve with 6" Sand Pipe/Deflector Plate Assembly, Aluminum Kamlok Fitting with Dust Cap Mounted on Rear Head • Discharge Valve, 6" Manually Operated Brass Valve with 6" Sand Pipe/Deflector Plate Assembly, Aluminum Kamlok Fitting with Dust Cap Mounted on Rear Head • Loading Nozzle, 6” Rear Loading Nozzle with Wear Sleeve and Aluminum Kamlok Fitting with Dust Cap Mounted on Rear Head • BOOM - 6” Moro hydraulic boom with 320 degree hydraulic rotation, 4' hydraulic extension, isolation valve and remote pendent • VACUUM BLOWER - Roots DVJ 1021 Blower 5184 CFM free air rating, 4100 CFM @ 18"Hg, 27"Hg maximum vacuum • Drive: Driven by Air Shift Transfer Case • Piping: Dual 8" Diameter with 8" Quick Disconnect Rubber Boot Assembly • Valving: 6" Manual Butterfly Vacuum Relief Valve and 12" In-Line Check Valve Assembly • FILTRATION SYSTEM - Dual 42” Diameter Steel Bag House Assembly with 29-4” x 59” Acrylic Coated Bags, Oil/Moisture Repellent, Air Cannon Pulsation with Hydraulic Lift Cylinder and Hold Down Clamps • Dual 20" Diameter Cyclones Mounted on 20" Diameter Drop Box with Side Swing Clean Out, 3" Brass Drain Valve and Aluminum Kamlok Fittings with Dust Caps • Cusco 30” Diameter Final Filter Assembly Installed for Protection of Blower with 20 ”Diameter Stainless Steel 100 Mic