Brand new unit, but was never put into service. 1,440 miles from dealer transport and set up. Extremely nice customized unit ready to work. Cab & Chasis, Summit Body and Hiab crane specs available upon request. Four Wheel Drive Unit for extreme duty - but was also built to cruise down the highway at 80+ mph.
This is a great work unit and has lots of extra features built-in.
- Truck Make/Model/Drive axles: ’21 Freightliner M2
- Truck VIN: MJ2860
- GVW: 33K
- Engine: L9
- Transmission: Allison 3000RDS
- CA: 150”
- PTO/pump installed by Hiab
- Receiver Tube Rating: 18,000 lbs.
- Gooseneck hitch rated at 30,000lbs
Upfit with Summit Standard Crane Body
Body Model: 800-9-1100160-20 Include aluminum doors Body Assembly: 800-42767 Sales Drawing: 800-22206 R1 Body construction as follows: o 10 ga galvanealed American Mill Standard body 160” lg. o 22” deep side packs o 54” cargo floor o 62” H D1/D2 compartments, remainder Flatbed on Drivers side o 62” H P1/P2 compartments, remainder Flatbed on Passenger side o Rub rail install on both sides of flatbed o Drop sidepacks 6” o 42” body gap for Hiab installed Knuckle boom crane o Aluminum shelving Driver Side o D-1 36” wide - Summit DRSA-30W-4-3-1-18D-3.625 aluminum drawer package with integrated top shelf w/dividers. • 30” wide X 18” deep • 4 – 3” Drawers • 3 – 5” Drawers • 1 – 7” Drawers • Integrated top shelf w/ dividers o D-2 22.5” wide - Two (2) adjustable shelves w/dividers o D-3 23.5” wide under body – Open for storage o D-4 26” wide under body – Air reel, FLR, payout rear of compartment • Plumbed to air tank Passenger Side o P-1 36” wide - split compartment with reinforced floor, upper and lower vents and bottle retainers for torch bottles, three (3) adjustable shelves w/dividers • Bolt-in bottle retainer • Ratchet strap • Mounting bracket for customer installed 300D control box, with hole in back wall for electrical. o P-2 22.5” wide – Two (2) adjustable shelves w/dividers o P-3 23.5” under body – Open for storage o P-4 26” wide – Open for storage Electrical Features: • Flush mount LED light kit with back-up alarm o Oval S/T/T in bumper 600-40137 (x2), 600-40139 (x2) o Oval integrated S/T/T in bumper 600-40208 (x2), 600-40139 (x2) • Backup alarm installed in bumper • 12 volt LED strip lights in each compartment with switches in the Cab • Work Lights: Rectangular LED 600-40185 o 4 Top of sidepacks, side facing, two per side D1/D2, P1/P2 o 4 rear mounted rear facing o Controlled by chassis upfitter switches in cab • Seven way RV style trailer plug, installed next to Gooseneck receiver in cargo floor Additional Features: • No light bar • 6” lube style bumper, with 2.5” receiver tube, 7 way RV style trailer plug • Channel Nut Kit ship loose • Hose retainer shipped loose • Fabricate and install 10” high riser for customer installed Vanair 300D. Riser installed in cargo area between D1/P1. Unit will be wired to control panel in the P1 compartment. • 19 gallon underbody air storage tank, plumbed to bulkheads in cargo floor • Tank 600-00088 • B&W turnover gooseneck hitch attached to chassis frame rail 700-70319 o Center of ball to be installed 4’-8” from tailboard o Hitch to be recessed under cargo floor with removable plate for access to ball hitch (Ref 9074) Hiab H082 B3.3 Knuckle boom crane: o Hiab to supply and install the following: • Knuckle boom crane • Hydraulic reservoir with return filter and mounting angles • 12/24V power inverter • Straight bolts for mounting crane