Platform Bodies are fully immersed in Knapheide's electrodeposition prime paint system for superior corrosion resistance.

Choose from either 1/8" treadplate, 10 gauge smooth steel, or 2" pine flooring (shown), whichever best fits your application.

Recessed RID lights located on the front and back corners of the side rails and rear tail skirt for increased visibility.

ICC Bumper for under-ride protection and for compliance with FMVSS regulations.

Front and side rails constructed of heavy duty 12 gauge formed steel for structural superiority.

Reinforced nominal 2x4 internal stake pockets lining all four sides of the platform that accept a wide variety of Knapheide side options for further customization.

7 gauge tapered tail skirt connected to the long sills for structural superiority.

Under side of body receives additional corrosion protection with Knapheide's water-based undercoat.

11 gauge steel cross sills on 12" center for structural rigidity.

Knapheide's BH Bulkhead is a rectangular drop in stlye bulkhead that is primarily paired with stake racks. The BH Series Bulkhead is compatible with all platforms and is one of the more popular bulkhead choices for Knapheide Platforms.

The BHG Series Bulkhead is reinforced with a gussett on each side increasing it's structural integrity. This bulkhead is a drop in rectangular bulkhead with a punched window for superior corrosion resistance. The BHG Series Bulkhead from Knapheide is compatible with all Knapheide Platforms.

The BHR Series Bulkhead is a weld on, rectangular style bulkhead. If you are haul heavy duty equipment then this is the bulkhead to keep you safe. With strong structural channel inner posts, the BHR Series Bulkhead can protect you from even the heaviest load. The BHR Series Bulkhead is compatible with all Knapheide Platforms.

The BHRT Series Bulkhead is a rectangular, weld on style bulkhead. With tapered corners and a reinforced design, the BHRT is both stylish and functional. The BHRT Series Bulkhead is compatible with all Knapheide Platforms.

D-Ring, swivel style cargo tie downs are rated at 2,000 lbs. They can be installed in steel or wood floors. D-ring tie downs have a 3.25" diameter and are ideal for securing large and heavy cargo for safe transport.

Knapheide has developed a new style of sides compatible with the Value-Master X Platform Bodies. Available in both 12' and 14' foot lengths, the refuse sides are punched 60% of the overall side height. Rear doors are equipped with a latch and bail system and pivot up to 270 degrees and can be latched in the open or closed position.

Have problems securing your cargo to your platform? Problem solved, introducing rope hooks for Knapheide Platform Bodies. Constructed of 1/2" diameter steel rod and welded on the front side of cross sills, Knapheide rope hooks can handle any cargo securing demands.

Formed channel is constructed of steel and welded from the first cross sill to the last, running almost the entire length of your platform floor. Channel is located on the street side of the platform. Compatible with a "S-Line Storable 4" Winch". This option if perfect for securing large or heavy cargo.

Knapheide Stake Racks can turn virtually any Knapheide Platform into a Stake Body. Stake height choices are 28" or 40". Choose our secure interlocking clip style or our simple quiet latch connection systems. No matter if you are hauling hay or brush, Knapheide Stake Racks have you covered.

Need to secure your cargo with cable or straps? The Underbody Tie Down Rail is perfect for the job. The 3/8" x 2" steel rail is welded 6.5" in from the outside of the platform side rail and runs almost the entire length of the platform floor. To keep your cargo safe, choose a Knapheide Underbody Tie Down Rail.

Knapheide Roughneck Toolboxes can be easily added to Knapheide Platform, Gooseneck, Dump, and Forestry Bodies for additional storage capacity. Above or under body toolboxes are available in a variety of different sizes to fit your application, from 20" in length up to 60" in length.

So you just bought a Knapheide Landscaper or Platform Body but need a heavy duty hoist to handle your dumping applications? Knapheide's Knaphoist has the patented lost motion device providing low mounting height resulting in greater stability, which keeps you safe during your dump. Our 3/4" thick high strength steel is much more durable and stable compared to formed steel used in competitor hoists. So when you need the most reliable hoist in the industry, choose the Knaphoist.

Knapheide's Knap-Pack is a great storage option for your Dump or Platform Body. The Knap-Pack offers easily accessible secure storage for your tools and equipment. The packs have rotary lockable latches for security and double spring over center door retainers to keep your compartment doors either open or closed. Knap-Packs are available in a straight or tapered design. Choose the Knapheide Knap-Pack for your secure storage needs.

The ICC Bumper is compatible with Platform and Dump Bodies. Dimensions depend on the chassis manufacturer. Under ride protection is required by law the ICC Bumper provides this protection. ICC Bumpers are not needed when a hitch is utilized.

All Knapheide Platforms have receiver hitch options available. All receiver hitches include under ride protection. Whatever your platform, the Knahpheide receiver hitch options can fulfill your hauling demands.

Browse the entire Platform Options Section which contains all available standard options for Platform Bodies.

Landscaper Racks are an economical solution for landscaping and lawn care companies. Landscape Racks turn a Value-Master X or Cargo-Hauler Platform Body (96 Series) into a Landscaper Body and enables a landscaping company to easily remove the side and rear section to utilize as a flatbed for snow removal operations during winter months. Landscaper Racks are packaged in 9', 12', and 14' sections.